Choose a Category
All Categories
stainless steel pipes
Inline Sight Glass mod.T1A/502
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· Temperature Range: See Gaskets
· Use with 304/316L stainless steel tubes that meets ASTM A269 or ASTM A270
· Certification: Material Certificate with Traceable Lot Number and Test Report
· Specifications Met: 3-A Certified 63-04
· Finish: No. 7 - ID & OD
· To complete a connection, you’ll need two quick-clamp fittings, a clamp, and a gasket (all sold separately).
DIN 28120 PN 10/16 Flanged Sight Glass High Pressure mod.T1A/503
· Sight glass fittings DIN 28120 are circular flanged sets suitable for welding into or onto vessel walls, complete with relevant matching seals and sight glass disc set between the weld pad and cover flange.
· They correspond in construction and assembly to the dimensions and constructional guidelines of DIN spec No. 28120 covering sizes DN 50 to DN 200.
· Based upon these standard thicknesses, distortion free location of the sightglass is assured providing that the welding pad has been correctly welded into or onto the vessel wall.
· Standard fittings are available for pressure up to 235 psi (depending on size, higher pressure rating on request). For temperature ratings (depending on material selection) see the following diagram.
Flanged Low-Pressure Weld-On Sight Glass mod.T1A/504
· smaller outer diameter, and therefore smaller vessel cutout
· shallower height above weld
· less weight
· easier to clean
· lower profile
· Viewing Diameter: 80 to 225 mm (3" to 9" nominal)
Flanged Weld-On Sight Glass with light mod.T1A/505
· smaller outer diameter, and therefore smaller vessel cutout
· shallower height above weld
· less weight
· easier to clean
· lower profile
· Viewing Diameter: 80 to 225 mm (3" to 9" nominal)
· Torch light installed
Sight Light with Brush mod.T1A/506
· smaller outer diameter, and therefore smaller vessel cutout
· shallower height above weld
· less weight
· easier to clean
· lower profile
· Viewing Diameter: 80 to 225 mm (3" to 5" nominal)
· Torch light installed
Union Type Sight Glass mod.T1A/507
· smaller outer diameter, and therefore smaller vessel cutout
· shallower height above weld
· less weight
· easier to clean
· lower profile
· Viewing Diameter: 80 to 225 mm (3" to 4" nominal)
Obround Sight Glass mod.T1A/508
· Wide range of lengths
· High Pressure Versions up to 25 bar
· Low profile, clean-line design with counter-sunk bolts
· Radius base flange available for flush fit with vessel interior
· Design Temperature: -10°C to 120°C(Silicone)
· Satin or Mirror Polish
Rectangular Sight Glass mod.T1A/509
· Wide range of lengths
· High Pressure Versions up to 25 bar
· Low profile, clean-line design with counter-sunk bolts
· Radius base flange available for flush fit with vessel interior
· Design Temperature: -10°C to 120°C(Silicone)
· Satin or Mirror Polish
Clamp Flat Sight Glass mod.T1A/510
· USP Class VI (tested to confirm biocompatibility)
· BPE Compliant and TÜV Approved
· Sight glass fused to metal conforming to DIN7079
· Borosilicate glass to USP Type I and DIN7080
· Standard surface finish of 10 Ra µ-in (0.25µm)
· Material to ASTM/ASME, TÜV and DIN/EN standards
· Certificate of Conformity to EN 10204-3.1B or 3.1A
Stationary Tank-Washing Nozzles mod.T1A/601
· Suitable for CIP - no moving parts
· Can be installed in any position
· Low-cost way to rinse easy-to-remove residues
· 316L stainless steel construction permits the use of a wide array of chemicals
· surface finish polished to sanitry standard
· Custom drilling upon request
· Suitable for cleaning tanks up to 13'(4m) in diameter
· Can be installed in any position