Choose a Category
All Categories
Stainless Coils And SHEETS
Beer Sampling Valve mod.SIG/66
· Spiral bonnet
· Stainless steel T316, T304
· Easy to operate, no cost of maintenance
· Serving thousands of brewing vessels
· 100% tested
Sanitary Diaphragm Valve Manual mod.SIG/69
· Valve Type: Diaphragm
· For Use With: Food, Beverage, Phamaceutical
· Seal Material: EPDM Rubber, PTFE Plastic
· Specifications Met: DIN 32676, FDA Compliant 21 CFR 177.1550
Sanitary Manual Butterfly Valve Weld End mod.SIG/79
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· All wetted surfaces are sanitary finish ≤ 32Ra
· Mirror finish disc provides an even flow preventing obstructions and restrictions.
· Opposing body bolt design prevents loosening between body sections due to vibration and operation, and provides positive sealing.
· Polyacetal bushings for the valve disc reduce friction and increase cycle life
· FDA approved available options: Silicone, EPDM, and Viton
· 3-Position SS304, Spring loaded pull handle
· Standard Tri-Clamp or butt weld ends. Other options available.
· Suitable for actuation with pneumatic electric actuators
· 100% tested
Sanitary Spring Check Valve Weld End mod.SIG/80
· Precision machined ASTM 316L body, stem and disc
· 25Ra polished body and internals
· Angle design for precision open and close
· Suitable with various liquids
· Standard Tri-Clamp or butt weld ends. Other options available.
· Standard EPDM seal ring, Viton and silicone available option
· Maximum Operating Pressure: 150PSI
· Operating Temperature Range: 15°f to 200°f
· Field Serviceable(no Special Tools Required)
· 1/2" to 6"
· 100% tested
Sanitary 3pcs Encapsulated Ball Valve Manual Weld end mod.SIG/82
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· ASTM 316L Stainless Steel
· Double sealing stem design
· Highly polished internals and end caps with 20 Ra finish
· All materials comply with FDA, USDA & 3A requirements
· Full Port Design for a lower pressure drop and less turbulent flow
· Investment cast body and end caps
· Standard Tri-Clamp or butt weld ends. Other options available.
· Precision stainless steel balls reduce torque and friction losses while entending seat life
· Full encapsulated design
· 100% tested
Pneumatic Sanitary Ball Valve T/C Air-Actuated mod. SIG/23
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· ASTM 316L Stainless Steel
· Double sealing stem design
· Highly polished internals and end caps with 20 Ra finish
· All materials comply with FDA, USDA & 3A requirements
· Full Port Design for a lower pressure drop and less turbulent flow
· Investment cast body and end caps
· Standard Tri-Clamp or butt weld ends. Other options available.
· Precision stainless steel balls reduce torque and friction losses while entending seat life
· Full encapsulated design
· 100% tested
Pneumatic Sanitary Butterfly Valve T/C Air-Actuated mod. SIG/20
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· All wetted surfaces are sanitary finish ≤ 32Ra
· Mirror finish disc provides an even flow preventing obstructions and restrictions.
· Opposing body bolt design prevents loosening between body sections due to vibration and operation, and provides positive sealing.
· FDA approved available options: Silicone, EPDM, and Viton
· Standard Tri-Clamp or butt weld ends. Other options available.
· 100% tested
2014N NPT 304/316 STAINLESS STEEL 2PC. CAST BALL VALVE FULL PORT
· For Use With: Natural Gas, Steam, Oil, Water, Air
· Connection : Female NPT (National Pipe Thread)
· Materials: 304/316 Cast Stainless Steel
· Seat: PTFE
· Medium: Water, Oil, Gas
· Pressure Rating: 1000 PSI
· Temperature Rating: -60° F to 450° F
· Handle: Blow-Out Proof
· Handle Locking Mechanism: handle equipped with locking device (Re-movable)
3 PC Screwed End Ball Valve 2013N
· For Use With: Natural Gas, Steam, Oil, Water, Air
· Full port, 1/2"~4" (DN15~DN100)
· 1000 WOG(PN63)
· -20℃ ~200℃ (-4℉~392℉)
· Investment casting
· Blow-out proof stem
· Locking device
· TA-Luft approved (option)
· Length conform to DIN 3202/4-M3-2013N-M3 (option)
· Thread type: ASME B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226
· For Use With: Natural Gas, Steam, Oil, Water, Air
· Connection: FNPT
· Mounting Position: Horizontal
· Body Material: 304/316 Stainless Steel
· 1/2" - 3"
· W.P. 200 WOG
· W.T. -20°C to 200°C
· Use with Water, Oil and Gas
· Investment casting