Choose a Category
All Categories
Stainless Coils And SHEETS
Sanitary 3pcs Encapsulated Ball Valve Manual mod.SIG/22
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· ASTM 316L Stainless Steel
· Double sealing stem design
· Highly polished internals and end caps with 20 Ra finish
· All materials comply with FDA, USDA & 3A requirements
· Full Port Design for a lower pressure drop and less turbulent flow
· Investment cast body and end caps
· Standard Tri-Clamp or butt weld ends. Other options available.
· Precision stainless steel balls reduce torque and friction losses while entending seat life
· Full encapsulated design
· 100% tested
Multiport 3-way Sanitary Ball Valves Manual mod.SIG/25
· For Use With: Air, Beverage, Dairy, Deionized Water, Food, Pharmaceuticals, Water
· CF8M(316L) stainless steel
· Direct mounting ISO5211 pad facilitates easy antomation and a smaller valve footprint for restrictive applications
· Spring loaded washers create live-loaded, self-adjusting stem assembly reducing maintenance costs
· Precision stainless steel balls reduce torque and friction losses while entending seat life
· Suitable for high cycle applications in manual or automated conditions double seal leak protection
· Using body cavity fillers meets FDA, USDA&3A requirements
· Available options: Tri-Clamp or Butt-weld; Cavity filled is standard; L-Port or T-Port configuration
· 100% tested
Sanitary Encapsulated Ball Valves Manual mod.SIG/33
· Heavy duty construction
· Made from press-forged and solution heat-treated blanks
· Parts in contact with the fluid made exclusively of AISI 316L stainless steel.
· Easy to sterilize. Internal parts easy to reach during CIP process
· Easy to disassemble
· Can be equipped with manaul or pneumatic controls
· Standard finish: external and internal mirror polishing Ra＜20
· Fully encapsulated design
· 100% tested
Sanitary 2-way Ball Valve Manual mod.SIG/39
· Two-piece Construction
· Field Serviceable(no Special Tools Required)
· PTFE Seat
· 304 and 316L material available
· Operating Temperature Range: 15°f to 200°f
· Maximum Operating Pressure: 150PSI
· 100% tested
Sanitary 3-Way ball valve Manual mod.SIG/42
· PTFE Seats with O-ring Backing for Low Operating Torque
· Can be equipped with manaul or pneumatic controls
· Standard finish: external and internal mirror polishing Ra≤20
· Maximum Operating Pressure: 150PSI
· Easy to disassemble and maintenance
· Available options: L-Port or T-Port configuration
· 100% tested
Sanitary Butterfly Type Ball Valve mod. SIG/50
· Stainless steel T316, T304
· Full Port Design for a lower pressure drop and less turbulent flow
· Simple and compact structure, light weight, strong and reliable design
· Low-torque, 90° rotation, facilitate of remote controlling
· Easy to disassemble and maintenance
· Maximum Operating Pressure: 150PSI
· Standard Tri-Clamp or butt weld ends. Other options available.
· External and Internal surfaces Ra≤0.8μm or on request.
· 100% tested
Sanitary Spring Check Valve mod.SIG/55
· Precision machined ASTM 316L body, stem and disc
· 25Ra polished body and internals
· Angle design for precision open and close
· Suitable with various liquids
· Standard Tri-Clamp or butt weld ends. Other options available.
· Standard EPDM seal ring, Viton and silicone available option
· Maximum Operating Pressure: 150PSI
· Operating Temperature Range: 15°f to 200°f
· Field Serviceable(no Special Tools Required)
· 1/2" to 6"
· 100% tested
Sanitary Y-Ball Check Valve mod.SIG/59
· Sizes from 1-1/2" to 3"
· Two-piece design for better alignment
· All wetted surfaces are sanitary finish in 316L stainless steel
· PTFE ball provides a better heat and abrasion resistance
· Repair kits are available for seat replacement
· Easy cleaning without tools
· Air blow check valve can be added
· Maximum Operating Pressure: 150PSI
· Operating Temperature Range: 15°f to 200°f
Sanitary Pressure Vacuum Relief Valve mod.SIG/63
· Self-acting
· Easy-installing
· Positive pressure:7.3-29psi(0.5-2bar), 14.5psi(1bar) as default
· Negative pressure(vacuum):4.35-13psi(0.3-0.9bar), 13psi(0.9bar) as default
· Temperature range:-15°F to 250°F
· Surface Finish: Ra 32μm as default
Sanitary Aseptic Sampling valve mod.SIG/65
· Full Hygienic Design
· Full PTFE Seat
· Open the valve to Sample, Sterilize the valve when it is closed
· Tri-clamp, Weld and KF Sterile Flange connection are available
· For Use With: Food, Beverage, Phamaceutical
· Single outlet available